MICRO-EPSILON optoNCDT 1900 PROFINET Operating Instructions Manual page 11

Laser Safety
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
nach DIN EN 60825-1: 2015-07
P 1mW;  =670nm
Fig. 1 Laser labels on the sensor cable
During operation of the sensor, the pertinent regulations according to IEC 60825-1 on „Safety of laser products" must be fully ob-
served at all times. The sensor complies with all applicable laws for the manufacturer of laser devices.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IEC 60825-1: 2014
P 1mW;  =670nm
COMPLIES WITH 21 CFR 1040.10 AND 1040.11
EXCEPT FOR CONFORMANCE WITH IEC 60825-1
ED. 3., AS DESCRIBED IN
LASER NOTICE NO. 56, DATED MAY 8, 2019.
Fig. 3 Sensor cable and sensor with laser sign, class 2
optoNCDT 1900 / Profinet
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IEC 60825-1: 2014
P 1mW;  =670nm
COMPLIES WITH 21 CFR 1040.10 AND 1040.11
EXCEPT FOR CONFORMANCE WITH IEC 60825-1
ED. 3., AS DESCRIBED IN
LASER NOTICE NO. 56, DATED MAY 8, 2019.
optoNCDT
Fig. 2 Laser warning sign on the sensor housing
Page 11