Table of Contents
Advertisement
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
TO REVIEW OR DELETE CALIPER MEASUREMENTS
1.
Access the calipers page. Select the Review...mode.
2.
Use the left and right review arrow buttons to move forward
or backward through the saved measurements to review
them.
3.
Select the Delete all button to delete all current measure-
ments.
4.
Select Yes to confirm deletion measurement interval of that
complex.
Discharge
TO DISCHARGE AN M300 PATIENT
Place M300 in the Central Charger.
1 Select the viewport of the M300 patient you want to discharge.
2 Select the Admit/Standby button from the BedView menu bar.
3 Select the Standby/Discharge tab.
4 Select the Discharge button,
5 Select the Discharge button inside the pop-up or select
Undo button to cancel the discharge.
Note: Bedside monitored patients must be discharged at the de-
vice.
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
OR
© 2014 Draeger Medical, Inc.
| 30
Advertisement
Table of Contents
