Dräger Infinity Central Station Quick Reference Manual page 41

Supplement for Infinity CentralStation Wide
Parameter order
The following illustration shows the Parameter order dialog, which lets the user configure the order of
parameters and how they display on the Main screen.
To access the Parameter order dialog:
1 Select System setup... on the main menu bar.
2 Select the Parameter order tab.
3 Next to Template, in the pull-down box, select from 25 predefined templates.
4 In the Name field, enter a name for the template you selected in step 3.
5 Next to Display mode, select:
 Auto – Unavailable waveforms and parameters from the source device will not be displayed.
 Manual – Unavailable waveforms and parameters from the source device will display blank
Only the first 11 parameters from the source device are available for display
6 Under Rearrange parameter order, use the up and down arrows to organize the waveforms under
Waveform, and parameters under Parameter box. Multiple parameter boxes can be selected and
moved at one time, using drag and drop functionality.
NOTE
Only named templates are available in the Main
screen layout tab or in the customize layout
dialog.
NOTE
If a template is active on the Main screen, the
template name can be modified but cannot be
deleted.
NOTE
Select the System default button to reset to the
factory default settings.
7 Click Apply to save the selections.
12
–
Supplement Infinity CentralStation Wide
–
VG2.1.2