Table of Contents
Advertisement
INFINITY CENTRAL STATION & M300 QUICK REFERENCE GUIDE
Accessing Trends & Data
TO ACCESS THE FULL DISCLOSURE PAGE
1.
Open the BedView page by selecting the viewport of the pa-
tient on the ICS Main screen.
2.
Select the Trends/Data... button on the Bedview menu bar.
3.
Select the Full disclosure tab.
4.
To zoom in/out use the
detail.
5.
To select the number of waveforms for display select the
Waveform arrow and select the number (1, 2, All) or format
(ECG or Cabrera if available).
FOR DISCHARGED PATIENTS:
1.
From the Main menu bar select the Trends/Data... button.
2.
Select the patient.
3.
Select Connect.
4.
Select the Full disclosure tab.
TO PRINT A SELECTED STRIP REPORT FROM FULL DISCLOSURE
1.
Left-click cursor on screen at the beginning of the strip desired
(a small orange box will appear that will change to a left
bracket once right bracket appears).
2.
Right-click cursor on screen at the end of the strip desired (a
right bracket will appear).
3.
Select Reports.
4.
Select Selected Strip Report.
5.
Select Selected & OK in the pop-up.
TO ACCESS THE EVENTS PAGE
1.
From the Bedview menu bar select the Trends/Data button.
2.
Select the Events tab.
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
button to display more or less
OR
OR
© 2014 Draeger Medical, Inc.
| 27
Advertisement
Table of Contents
