Reading Operation Data - Samson 5757-7 Mounting And Operating Instructions

Controller with electric actuator

Hide thumbs Also See for 5757-7:

Table of Contents

[Min ...]

[Max...]

7.6

Reading operation data

Note: Changes cannot be made to operation data in the Operation folder.

In online mode, you can view the current operation data and the position of the slide

switch in the Operation folder.

In offline mode, you can view the individual configuration specifications for level #1 and

level #2. Change Slide switch position parameter to switch between levels.

Note: The user level is set to "Customer" by default in TROVIS-VIEW. The current user level is

displayed on the status bar. When the user level is set to "Specialist", additional data points

are displayed in the directories Operation and Diagnostics as well as in the subdirectories

Test functions, Calibration and Status messages .

Change the user level to "Specialist" by selecting User Level in Device menu (see section 7.4).

Configuration and operation using TROVIS-VIEW interface

Set parameter to the displayed minimum value (value in gray to indi-

cate that the parameter value is the same as the minimum value)

Set parameter to the displayed maximum value (value in gray to in-

dicate that the parameter value is the same as the maximum value)

EB 5757-7 EN

Table of Contents