Data Transmission Between Actuator And Memory Pen - Samson 5757-7 Mounting And Operating Instructions

2. Select Interface in the Memory Pen menu.
3. Click the Start button in Automatic detection field of the dialog box. The computer auto-
matically searches for the interface assigned to the memory pen.
Message: "Memory pen found at COM ..."
4. Confirm interface setting by clicking OK button.
Downloading data from TROVIS-VIEW to the memory pen
5. Select Download to Memory pen in Memory pen menu
6. Click OK button to start data transmission.
7. Confirm the message "Checking procedure was successful. All data in device will be
overwritten".
Uploading data from memory pen to TROVIS-VIEW
5.Select Upload from Memory pen in Memory pen menu to start data transmission.

8.2.2 Data transmission between actuator and memory pen

1. Plug memory pen (3) together with modular adapter (2) into the serial interface (COM
port) of the PC (Fig. 15).
Fig. 16 · Connecting actuator – memory pen
3
4
3 Memory pen
4 Serial interface
(RJ 12 jack)
Data transmission
47
EB 5757-7 EN