Toshiba PORTEGE M400 Maintenance Manual page 213

3.30 Sound Test program
(2) Audio CD
Insert an audio CD and the following menu appears in the display.
SUB-TEST
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS
CD Sound track number (01-98 : Track) ?
Select the track number you want to test and press Enter twice.
The following message appears in the display and selected track is played.
After pressing any key, the music stops and the display returns to the selection menu of the
track number.
NOTE:
3.30.4 CD Sound (Legacy)
To execute the CD Sound (Legacy) test, select 4 and press Enter.
CAUTION: Sound (Legacy) test is not supported in this model.
PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
CD/DVD TEST IN PROGRESS XXXXXXXX
: XX
: XXXXXX
Play start CD sound !
Press any key <play stop>
When the CD-ROM test is executed, "ALL DEVICE" must be selected in the
[Device Config.] of the BIOS SETUP. If the "ALL DEVICE" is not selected,
music can not be played.
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] : test end
[Ctrl]+[C]
ERROR COUNT: XXXXX
READ DATA : XX
STATUS : XXX
Drive # = 0, ATAPI status =00
Command = XX
[[Block address = XXXXXXXX]]
[[Block length
Final : Block address = XXXXXXXXX
[CONFIDENTIAL]
3 Tests and Diagnostics
: key stop
= XXXXXXXX]]
3-95