Sensor Board - Toshiba PORTEGE M400 Maintenance Manual

4 Replacement Procedures

4.22 Sensor board

Removing the Sensor board
The following describes the procedure for removing the sensor board. (See Figure 4-39.)
1. Remove the sensor board from the slot.
2. Disconnect the sensor cable from the connector on the sensor board.
Installing the Sensor board
The following describes the procedure for installing the sensor board. (See Figure 4-39.)
1. Connect the sensor cable to the connector on the sensor board.
2. Install the sensor board to the slot.
4-58
Get user manuals: See SafeManuals.com
Figure 4-39 Removing the sensor board
[CONFIDENTIAL]

Sensor board

Sensor cable
PORTEGE M400 Maintenance Manual (960-541)
4.22 Sensor board