Hdd Cable - Toshiba PORTEGE M400 Maintenance Manual

Hide thumbs Also See for PORTEGE M400:

Table of Contents

4.21 HDD cable

Removing the HDD cable

The following describes the procedure for removing the HDD cable. (See Figure 4-38.)

1. Peel off the insulator and disconnect the HDD cable from the connector CN1850 on

2. Remove the HDD cable from the slot.

Installing the HDD cable

The following describes the procedure for installing the HDD cable. (See Figure 4-38.)

1. Install the HDD cable to the slot.

2. Connect the HDD cable to the connector CN1850 on the system board and stick the

PORTEGE M400 Maintenance Manual (960-541)

Get user manuals:

See SafeManuals.com

the system board.

Figure 4-38 Removing the HDD cable

4 Replacement Procedures

[CONFIDENTIAL]

Table of Contents