Toshiba PORTEGE M400 Maintenance Manual page 410

Appendices
(3) Explanation of Main Menu
The Independent Utility has following Main Menu.
Create Array
Start Rebuild
Check Media
Modify Array
Delete Array
Physical Drive
Exit
CAUTION: Do not use the following item of the Independent Utility for maintenance.
J-12
Get user manuals: See SafeManuals.com
Table J-4 Item of Main Menu displayed
Builds RAID array.
Rebuilds RAID-1. While the rebuild is suspended, the message of
"Resume Rebuild" is displayed.
Checks if any error in drives configuring array. This is available for
the RAID-1 in the "Optimal" condition.
Changes the setting of array.
Delete array.
Changes the setting of physical drive.
Exits from the utility.
[Create Array]
This changes the current RAID configuration or information, and delete
user's data. Do not use for maintenance.
[Start Rebuild (Resume Rebuild)]
This changes the current RAID configuration or information, and delete
user's data. Do not use for maintenance.
[Modify Array]
This changes the current RAID configuration or information, and delete
user's data. Do not use for maintenance.
[Check Media]
This changes the current RAID configuration or information, and delete
user's data. Do not use for maintenance.
[Delete Array]
This changes the current RAID configuration or information, and delete
user's data. Do not use for maintenance.
[CONFIDENTIAL]
Appendix J Maintenance of TOSHIBA RAI
Explanation
PORTEGE M400 Maintenance Manual (960-541)