Toshiba PORTEGE M400 Maintenance Manual page 132

3 Tests and Diagnostics
NO DRIVE for one drive is displayed
3-14
Get user manuals: See SafeManuals.com
When "NO DORIVE" is displayed and the HDD is connected to the port, follow the
procedures below to check the HDD failure.
(1) Install a new HDD.
When "NO DORIVE" is still displayed, it is judged that the MB or cable fails.
(2) When a new HDD is recognized, it is judged that the HDD removed is failed.
Specify the reason by using the Independent Utility.
TOSHIBA RAID / RAID Information Display
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level Status
LD0 RAID-1 DEGRADE
Write cache
Degrade Bootup
MBR Protection
S.M.A.R.T
Port Assign Status
0 LD0-0 ONLINE
1 NODRIVE xxGB FUJITSU----------
< RAID: not OPTIMAL >
[CONFIDENTIAL]
3.3 Check of the RAID configuration
Capacity
xxGB
: Enable
: Yes
: Disable
: Enable
Size Model
xxGB FUJITSU----------
PORTEGE M400 Maintenance Manual (960-541)
Rev xx.xx.xxxx
Rev
xxxxxxx
xxxxxxx