Toshiba PORTEGE M400 Maintenance Manual page 317

4.30 Hinge assembly
4. Peel off four acetate tapes and remove the wireless LAN antennas and Bluetooth
5. Remove the following screw and hinge assembly by lifting it up.
Bluetooth antenna
Installing the Hinge assembly
The following describes the procedure for installing the hinge assembly. (See Figure 4-51
and 4-52.)
1. Seat the hinge assembly in place and secure it with the following screw.
2. Stick the wireless LAN antennas and Bluetooth antenna and arrange the wireless
3. Install the antenna cover S and antenna cover T to the slot.
4. Secure the antenna cover S with the following screw.
5. Install the LCD harness earth spring and secure the hinge assembly and LCD
6. Install the Harness holder and secure with the following screw.
PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
antenna.
• M2.5×6.0B
FLAT HEAD screw
Acetate tape
Wireless LAN antenna
Figure 4-52 Removing the hinge assembly (2)
• M2.5×6.0B
FLAT HEAD screw
LAN antenna cables and Bluetooth antenna cable in place.
• M2.0×6.0S
S-THIN HEAD screw
harness earth spring with the following screws.
• M2.5×6.0B
FLAT HEAD screw
• M2.5×6.0B
FLAT HEAD screw
Acetate tape
[CONFIDENTIAL]
4 Replacement Procedures
×1
×1
×1
×1
×1
4-79