Switch Board (Nw Board) - Toshiba PORTEGE M400 Maintenance Manual

4 Replacement Procedures

4.28 Switch board (NW board)

Removing the Switch board (NW board)
The following describes the procedure for removing the switch board (NW board). (See
Figure 4-49.)
1. Remove the following screw securing the switch board and pull up the switch board.
2. Disconnect the switch cable from the connector CN9550 on the switch board.
Installing the switch board (NW board)
The following describes the procedure for installing the switch board (NW board). (See
Figure 4-49.)
1. Connect the switch cable to the connector CN9550 on the switch board.
2. Install the switch board and secure it with the following screw.
4-76
Get user manuals: See SafeManuals.com
• M2.5×4.0B
FLAT HEAD screw
Switch cable
Figure 4-49 Removing the switch board
• M2.5×4.0B
FLAT HEAD screw
[CONFIDENTIAL]
M2.5x4.0B FLAT HEAD
Switch board
CN9550
PORTEGE M400 Maintenance Manual (960-541)

4.28 Switch board (NW board)

×1
×1