Toshiba PORTEGE M400 Maintenance Manual page 268

4 Replacement Procedures
Installing the Wireless LAN card
To install the Wireless LAN card, follow the steps below. (See Figure 4-17.)
CAUTION: Be sure to switch the computer off before installing the wireless LAN card.
1. Insert the wireless LAN card to the connector slantwise and press it to connect
2. Connect the wireless LAN antenna cables to the connectors on the wireless LAN
3. Install the metal plate in place and secure it with the following screw.
4. Stick the insulator (with the spacer).
CAUTION: 1. When replacing with a new insulator, a new spacer should be stuck to the
4-30
Get user manuals: See SafeManuals.com
Otherwise, the computer or the wireless LAN card may be damaged.
firmly.
card and secure it with the following screw.
• M2.0×4.0B
BIND screw
• M2.0×4.0B BIND screw or M2.0×4.0B TORX screw ×1
back of the insulator.
2. When keyboard supports (for the model of no wireless LAN) are stuck, the
spacer is not necessary.
[CONFIDENTIAL]
4.10 Wireless LAN card
×1
PORTEGE M400 Maintenance Manual (960-541)