Microphone/Front Panel - Toshiba PORTEGE M400 Maintenance Manual

4.16 Microphone/Front panel

4.16 Microphone/Front panel

Removing the Microphone/Front panel
The following describes the procedure for removing the microphone/front panel. (See Figure
4-30.)
1. Peel off the insulator and glass tape.
2. Disconnect two microphone cables (left and right) from the connector CN6060 and
3. Remove the front panel from the base assembly.
4. Remove the microphone hold plates (left and right) and microphones (left and
Microphone
Microphone hold
PORTEGE M400 Maintenance Manual (960-541)
Get user manuals: See SafeManuals.com
CN6061 on the system board.
right) from the front panel.
Front panel
plate
Microphone cable
(to CN6061)
Figure 4-30 Removing the microphone/front panel
4 Replacement Procedures
Insulator
Glass tape
Microphone
Microphone hold plate
Microphone cable
(to CN6060)
[CONFIDENTIAL] 4-47