Spare Parts/Service Information
Recommended Spare Parts
Listed are a set of spare parts that will periodically require replacement due to normal wear. These parts should
be ordered to keep the taping heads in production:
AccuGlide™ 2+ STD 2 Inch Upper Taping Head
Qty. Part
Number
4
78-8076-4500-3
1
78-8070-1274-1
1
78-8017-9173-8
2
78-8052-6602-6
1
78-8076-4726-4
AccuGlide™ 2+ STD 2 Inch Lower Taping Head
Qty. Part
Number
1
78-8017-9173-8
2
78-8052-6602-6
4
78-8076-4500-3
1
78-8070-1273-3
1
78-8076-4726-4
In addition to the above set of spare parts supplied with the taping head, it is suggested that the following spare
parts be maintained which will require replacement under normal wear of the taping head.
Qty. Part
Number
1
78-8057-6179-4
1
78-8057-6178-6
1
78-8113-7030-9
Replacement Parts and Service
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".
2" STD Taping Head
Description
Stud – Mounting
Spring – Upper Extension (Silver)
Blade – 65 mm/2.56 Inch
Spring – Cutter
Tool – Tape Threading
Description
Blade – 65 mm/2.56 Inch
Spring – Cutter
Stud – Mounting
Spring – Lower Extension (Black)
Tool – Tape Threading
Description
Roller – Applying
Roller – Buffi ng
Spring – Torsion
19
2010 May