Table of Contents
Advertisement
1. CAUTIONS WHEN WORKING ON ELECTRICAL UNITS
10A
-
Disconnect the negative cable from the battery
in advance when working on electrical units.
Make sure to turn "OFF" the ignition switch
and other lamp switches before
disconnecting or connecting the negative
battery cable. (Otherwise, semiconductor
parts can be damaged.)
-
Do not drop or appy excessive impact to
sensors and relays.
-
If a fuse is blown, replace it with a fuse which
has the correct amperage rating. If you use a
fuse with higher capacity than the
specification, the component can be damaged
or catch fire.
15A
8410-00
Advertisement
Table of Contents
