Table of Contents
Advertisement
Power Sleep Mode
1.
Entering Condition
1)
When all the doors including the hood are closed.
2)
When the ignition key is in "OFF" position.
3)
When there is no key in the driver's/passenger's door key cylinder.
4)
The system enters into the sleep mode for saving power if there is any change for 6 seconds while
the driver's/passenger's/rear doors and tailgate are locked with the above three conditions met.
2.
The sleep mode is deactivated immediately if any of them is out of the specified conditions
(wake-up mode).
Also, the sleep mode is deactivated when receiving the UNLOCK signal from the remote control key.
3.
The sleep mode in Step 1 is deactivated on following conditions:
- Operation of room lamp, key hole illumination, headlamp, siren, tail lamp or power window
- Unlock signal from REKES key (deactivated for 30 seconds)
4.
The sleep mode is deactivated when a door is opened.
Advertisement
Table of Contents
