Table of Contents
Advertisement
Auto Switch Position Reminder (Power-Up Reminder Wiper)
1.
When turning off and on the IGN2 switch with the auto switch on, the system drives the wiper motor
through LOW relay one cycle regardless of communication with rain sensor.
2.
The wiper relay (LOW) is turned on and the wiper motor runs one cycle when changing the auto
switch from "OFF" to "ON" position regardless of communication with rain sensor(while the ignition
key is in the "ON" position).
When the auto switch is turned to the "ON" position again from the "OFF" position, the system drives
the wiper motor through LOW relay one cycle only when the rain sensor detects the "Rain Detected"
signal.
8710-08
Advertisement
Table of Contents
