SSANGYONG Rexton Y290 2012 Manual page 196

2) Driver's Seat and Outside Rearview Mirror Memory Setting and
Recalling
Setting Conditions
- Parking brake : Applied
- Shift lever : In "P" position
* Data source
- Parking brake & IGN ON: STICS
- Shift lever position & vehicle speed: Meter cluster
available.
Memory Setting (driver's seat and outside rearview mirror)
Outside rear-
view mirror
Driver's seat
Adjust the positions of the
driver's seat and the outside
rearview mirrors.
- Vehicle speed : lower than 1 km/h
- Ignition: ON (Don't start the engine for safety)
SPWM
Position memory set
button
Press the set switch for over
200ms to enter the memory
setting mode.
The buzzer sounds once
7410-32
SPWM
Position buttons
Within 5 seconds, press one
of the position buttons
(1,2,3) for over 200 ms to
complete the memory setting
procedure.
The buzzer sounds twice