Table of Contents
Advertisement
6) For faulty rain sensor
1.
When the wiper speed control switch is turned to step 2 from step 3, the wiper motor operates
one cycle at low speed if STICS receives a faulty sensor signal (S_RSFAULT) from rain sensor
unit with IGN ON and INT/AUTO switch ON.
2.
When the wiper speed control switch is turned to step 3 from step 4, the wiper motor operates one
cycle at low speed if STICS receives a faulty sensor signal (S_COMMFAULT) from rain sensor unit
with IGN ON and INT/AUTO switch ON.
8611-09
Advertisement
Table of Contents
