Table of Contents
Advertisement
Speed Sensitive AUTO Wiper
For RKSTICS without the rain sensor, perform the following operation:
1.
Controls the wiper intermittent operation by the values from the vehicle speed and the volume.
-
Calculates and converts the Intermittent interval automatically by using the AUTO VOLUME
when the ignition switch is in the "ON" position and the AUTO switch is in the "ON" position.
The wipers are operated in vehicle speed sensitive mode when turning the AUTO switch to the
-
"ON" position with the engine running or starting the engine with the AUTO switch positioned to
"ON".
-
2.
Vehicle speed calculation
[Input the vehicle speed]
It is calculated by the numbers of input pulses for one second.
1 [PULSE/SEC] =
3.
VOLUME calculation
-
The pause time of the vehicle speed sensitive AUTO wiper is calculated by the AUTO volume
(input voltage). Each level has the hysteresis.
4.
Pause time calculation
-
Pause time: the duration that wipers are stopped at parking position
-
Elapsed time: the duration after the wiper motor started to operate from parking position
-
The pause time is calculated by the vehicle speed and the VOLUME.
If the pause time is below 1.0 second, the wipers operate without pause.
If the pause time is over 1.5 seconds, the wipers operate intermittently.
Advertisement
Table of Contents
