SSANGYONG Rexton Y290 2012 Manual page 450

Operation
Description
Driving 2H
mode
4H
4L
Mode change
4L
Mode
2 Wheel drive Rear-wheel drive mode. This is used under
(rear wheel) normal or high-speed driving conditions on
public roads or highways.
4 Wheel drive This is used under sandy, muddy or snow-
(high speed) covered road conditions
4 Wheel drive This is used for maximum traction.
(low speed) When cornering with low speed in 4WD
condition, there could be tire dragging, some
drive train. These are normal conditions due to
internal resistance in the drive train when the
4WD system is properly working
2 Wheel drive Shifting is possible while driving at the speed of
70 km/h or less
2 Wheel drive,
For Automatic Transmission:
4 Wheel drive
-Stop the vehicle on level ground and move the
(high speed)
switch to the desired position.
(low speed)
For Manual Transmission:
-Stop the vehicle on level ground and move the
turn the switch to the desired position while
depressing the clutch pedal.
To make the mode change easily, stop the
vehicle on level ground and turn the mode
switch to the desired position and move
the shift lever to "N"-"R"-"N" while
depressing the brake pedal.
3240-01
Conditions