Administrator; Service Mode; Ramping Speed; Tm Calculator - Labnet MultiGene OptiMax Thermal Cycler Instruction Manual

12.4 Administrator

The password of Administrator is "9610". The Administrator of this unit has rights to delete any User Folder and any Protocols inside a
User's Folder.

12.5 Service Mode

Only authorized service personnel have the password to enter Service Mode and perform necessary maintenance and repairs.

12.6 Ramping Speed

Users can choose the Ramping Speed. High Ramping Speed heating rate about 4°C/sec and cooling rate about 3°C/sec. Low Ramping
Speed heating rate about 3°C/sec and cooling rate about 2°C/sec. NOTE: Remember to press F1:SAVE to store your settings.
SYSTEM>RAMPING SPEED
Ramping Speed:
Press F1 to save your settings

12.7 Tm Calculator

Users can press the number of the bases of A, T, C and G in the sequence, then press F1:RUN to get the Tm value of the sequence.
SYSTEM>TM CALCULATOR
A =
T =
C =
G =
Press F1 to Calculate
RUN
1
1 : High Ramping Speed
2 : Low Ramping Speed
SAVE
F 2
F 1
0
0
0
0
F 2
F 1
8/21/2022
F 3 F 4
8/21/2022
F 3 F 4
11:00
EXIT
F 5
11:00
EXIT
F 5
Instruction Manual | 19