Viewing A User Folder; Creating A New User Folder; Editing A User Folder; Deleting A User Folder - Labnet MultiGene OptiMax Thermal Cycler Instruction Manual

7.1 Viewing a User Folder

All Protocols are stored inside the User folders. Use the directional arrow keys to select a User folder. Press F1:OPEN to view the names
of all Protocols inside the selected folder. To view the contents of the User, you will need to enter the 4-digit Personal Identification
Number (PIN) as shown in the screen below. After the PIN is entered, press F1:ACCEPT or the ENTER key to confirm the PIN. To run a
Protocol, see Section 8.1.

7.2 Creating a New User Folder

Under User Folder screen, press F2:NEW to create a new User folder. After entering the new User name, press F1:ACCEPT to accept the
new User folder name. The MultiGene thermal cycler will prompt you to enter a 4 digit PIN. Press F1:ACCEPT to save the new folder
name and PIN.
User folder name: 12 characters max.
User folder no.: 50

7.3 Editing a User Folder

Under the User Folder screen, use the directional arrow keys to select a User folder. Press F3:EDIT to edit the User name. A PIN is
required to edit the User folder name. After editing the User folder name, press F1:ACCEPT to save the edited User name.

7.4 Deleting a User Folder

Use the directional arrow keys to select a User folder. Press F4:DELETE to delete the selected User folder. You are required to enter the
PIN, and press F1:ACCEPT or ENTER. The screen will prompt "Do you want to delete". Press F1:ACCEPT to confirm the deletion. Press
F5:EXIT to abort the deletion.
NOTE: User folders which contain any protocols can't be deleted except by the administrator.
8 | LABNET MULTIGENE OPTIMAX THERMAL CYCLER
USER FOLDERS>Mike
Please enter PIN:
Enter PIN and press ACCEPT, Press ACCEPT if
not PIN protected.
ACCEPT
F 2
F 1
8/21/2022
F 3 F 4
11:00
EXIT
F 5