Electrical Safety - Power Fist 9049057 Instructions Manual

V1.0
8. Keep hands and fingers away from the work area. Any part of the body
contacting the tool' s working parts could result in an injury.
9. Only use accessories that are specifically designed for use with the
tool. Ensure the accessory is tightly installed.
10. Only use an accessory that exceeds the Speed Rating (see Specifications).
11. Before using the tool on a workpiece, test the tool by running it at the
highest Speed Rating for at least 30 seconds in a safe position. Stop
immediately if there is any abnormal vibration or wobbling. Check the
tool to determine the cause.
a. Do not allow the tool to run without load for an extended period
of time, as this will shorten its life.
12. Never touch the tool accessory or workpiece during or immediately after
use. They may be hot and could inflict a burn injury.
13. Take work breaks to prevent the tool's motor from overheating
and/or overloading.
14. Never use a tool with a cracked or worn tool accessory. Change the
tool accessory before using it.
15. Do not start the tool when the tool' s accessory is touching the workpiece.

ELECTRICAL SAFETY

WARNING! Do not touch or handle a live tool with any part of your body that
is wet or damp. Wet skin reduces resistance to electrical current, increasing
the danger of a serious or fatal shock.
1. Do not alter any parts of the tool or accessories. All parts and
accessories are designed with built-in safety features that may be
compromised if altered.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3. Do not expose the saw to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
4. Hold the tool by the insulated gripping surfaces when performing an
operation where the cutting accessory may contact hidden wiring.
Contact with a live wire will also make exposed metal parts of the
power tool live and shock the operator.
Visit www.princessauto.com for more information
20V Li-ion Cordless Reciprocating Saw 9049057
5