Table of Contents
Advertisement
Available languages
Available languages
9049057
BATTERY SAFETY
WARNING! Only charge a battery with a charger designed for that purpose. Do
not use modified chargers or a charger that does not specify the voltage,
amperage or recharge rate. Improper charging can lead to battery rupturing.
WARNING! Do not charge a damaged or frozen battery. Contact your local
municipality for proper disposal procedures. Consult the Safety Data
Sheet (SDS) for your battery before use or maintenance.
1.
Do not expose the battery to heat or throw it in a fire. The contents are
flammable and the battery may explode. Remove any source of ignition
such as an open flame or a tool like a heater from the area.
2.
Do not inhale smoke issuing from a burning battery, as it is toxic.
3.
Do not disassemble or crush the battery as the contents are corrosive
and flammable. Exposure may cause an injury. There is a risk of
escaping hazardous vapors. These vapors can irritate the respiratory
track. Always ensure proper ventilation and immediately consult a
doctor, if you feel unwell.
4.
Even a discharged battery may still carry a charge. To prevent a shock,
place battery terminal caps or covers over the terminal to prevent
accidental contact. Hold the battery by the bottom if moving the
battery to a different location.
5.
Do not store the battery in containers / spaces with loose metal
objects. Keep it away from other metal objects that can make a
connection between terminals. Shorting out the battery terminals may
cause burns or a fire.
6.
A battery-operated tool with internal batteries or with a separate
battery pack must only be powered by the included battery. Do not
mix different brands of tools and batteries or use adapters to allow
you to use a battery pack with a different voltage. This can damage the
tool' s electrical mechanism and create a fire hazard.
7.
If fluids leak from the battery, avoid contact. Leaking battery fluid can
cause irritation of the skin or burns. If contact should occur, flush
immediately with water. In case of accidental contact with the eyes,
seek medical aid.
8.
Do not disconnect from the power source in place of using the ON/OFF
switch on the tool. This can lead to an accidental startup when the tool
is connected to the power supply.
6
20V Li-ion Cordless Reciprocating Saw
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
