Table of Contents
Advertisement
Available languages
Available languages
9049057
Tool is making
unusual sounds
Heavy sparking
inside motor
housing.
Overheating
16
20V Li-ion Cordless Reciprocating Saw
1.
The saw's parts may
be rubbing or binding.
2.
Electrical components
may be shorting.
Motor is shorting.
1.
Forcing machine to
work too fast.
2.
Blocked motor housing
vents.
1.
Check for obstructions or
misaligned tool components.
Lubricate, repair or replace
the components based on
the particular problem.
2.
Disconnect tool from the
power source immediately.
Have the tool examined by a
qualified technician.
Disconnect tool from the power
source immediately. Have the tool
examined by a qualified
technician.
1.
Allow machine to work at its
own rate.
2.
Keep the blade sharp.
Replace as needed
3.
Blow dust out of motor using
compressed air.
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
