Table of Contents
Advertisement
Available languages
Available languages
9049057
CLEANING
1.
Remove all swarf from the machine with a vacuum cleaner or
compressed air. Focus on removing dust from the motor' s fan vents.
2.
Thoroughly clean all surfaces.
CLEANING THE CHARGER
1.
Only clean with a damp cloth. Avoid using solvents when cleaning
plastic parts.
2.
To reduce risk of electric shock, unplug the charger from the outlet
before attempting any cleaning. Removing the battery pack will not
reduce this risk.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
1.
Components should be kept dry, with machined surfaces lightly oiled.
2.
Always remove the saw blade and store in a safe place.
3.
Never store equipment in a wet/damp environment.
BATTERY STORAGE
Remove the battery when not in use for an extended period of time to
prevent damage.
1.
Do not store the battery completely discharged. Charge it fully before
storing. Recharge occasionally if storing for a long time.
2.
Do not store batteries in containers / spaces with loose metal objects.
Battery terminals could be short circuited if they come into contact
with metal objects. In addition to damaging the battery, you increase
the risk of a fire.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
14
20V Li-ion Cordless Reciprocating Saw
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
