Table of Contents
Advertisement
Available languages
Available languages
9095738
20V Cordless Brushless Dry Cut Metal Saw, Tool Only
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply with
CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work
performed.
2.
Wear the appropriate type of full-face shield in addition to safety
googles, as the work can create chips, abrasive or particulate matter.
3.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a.
Do not wear gloves when operating a tool that can snag the
material and pull the hand into the tool.
4.
Wear protective clothing designed for the work environment and tool.
a.
Flame retardant clothing is recommended for use with this tool.
5.
Non-skid footwear is recommended to maintain footing and balance in
the work environment.
6.
Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
7.
Wear a NIOSH approved respirator when working on materials that
produce hazardous fumes, dust or particulate matter.
8.
Wear an approved hard hat or safety helmet.
9.
This tool can cause hearing damage. Wear hearing protection gear with
an appropriate Noise Reduction Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
4
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
