Table of Contents
Advertisement
Available languages
Available languages
9049057
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
CUTTING PRECAUTIONS
WARNING! Some surfaces contain materials which can be toxic. When
working on materials that may contain lead, asbestos, copper chromium
arsenate or other toxic materials, extra care should be taken to avoid
inhalation and minimize skin contact.
1.
Only use accessories that are specifically designed for use with the
tool. Ensure the accessory is tightly installed.
2.
Use caution when cutting damp wood, pressure treated lumber or
wood containing knots. Adjust speed of cut to maintain smooth
advancement of tool without decrease in cutting accessory speed.
3.
Do not use a dull or damaged cutting accessory. A dull cutting accessory
requires more force to use the tool, possibly causing the accessory to
break. This may cause an injury and will damage the workpiece.
a.
Dull or improperly set cutting accessories produce a narrow kerf
that can cause excessive friction on the cutting accessory,
resulting in binding or a kickback. Keep the cutting accessory' s
edge sharp and clean.
4.
Only use a cutting accessory that exceeds the No Load Speed
rating (see Specifications).
5.
Always wait until the motor has reached full speed before starting a cut.
CUTTING TOOL PRECAUTIONS
1.
Use the correct mounting hardware. The mounting hardware is
designed to hold the cutting accessory on the tool to allow optimum
performance and safety of operation. Mismatched mounting hardware
may result in a tool malfunction and cause an injury.
a.
Always use blades that are correctly sized and shaped for the
tool. Blades that do not match the tool' s mounting hardware will
run erratically, causing loss of control.
8
20V Li-ion Cordless Reciprocating Saw
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
