Table of Contents
Advertisement
IC-KP2-*
Installation
3.4
R/W heads and trigger sensors
You can connect a maximum of two R/W heads (125 kHz or 13.56 MHz) or R/W
heads with electromagnetic coupling (UHF with 868 MHz) to the IDENTControl
Compact.
On the two-channel unit, you can connect a trigger sensor to sockets 1 and 2
instead of a R/W head. You can assign the trigger sensor to the R/W head. The
trigger sensor must be PNP.
1
3.5
Ground connection
Connect the IDENTControl Compact unit to ground via a screw on the right under
the housing.
Note!
In order to guarantee safe grounding, mount the serrated washer between the
crimp connector and the housing.
Use a ground conductor lead with a cross-section of at least 4 mm
1
Housing
2
Serrated lock washer
3
Crimp connector
4
Lock screw
Connecting the IDENTControl Compact to ground
Screw the ground conductor to the housing with a crimp connector.
2
1
2
3
3
4
5
5
4
1
2
3
+
+
A
signal
-
-
B
4
trigger switch
2
.
13
Advertisement
Table of Contents
