Table of Contents
Advertisement
150-10-7 Digital Physician Scale
4.3
Configuration Mode
Use the following steps to enter into Configuration mode.
1. Ensure the scale is turned off.
2. Turn the scale on by simultaneously pressing
The unit cycles through its startup function and continues to display the software version.
3. Access the setup switch located in the back of the scale to enter the setup parameters for the scale. Use a small paper
clip, small screwdriver or other similar object to press the setup switch.
4. Once the setup switch is pressed, PROG displays.
5. Scale can be configured using a series of menus accessed through the front panel when the scale is in Setup mode.
PROG
6. Press
to advance to the desired menu.
BMI
7. Press
and advance in the manual to the related menu selection for further instructions.
ENTER
10
Visit our website
and
CALIB
Figure 4-2. Top Level Menu
www.RiceLake.com
. Continue to hold both keys until Id appears.
ENTER
DEF
DONE
TEST
Available only when
accessing test menu
See
Section 4.7 on page 15
Advertisement
Table of Contents
