Weighing; Hold/Release Function; Using The Body Mass Index (Bmi) Function; Lb Mode - Rice Lake 150-10-7 Technical Manual

150-10-7 Digital Physician Scale
3.2

Weighing

Use the following steps to weigh.
to turn on the scale. 0.0 prompts along with ZERO on the display.
1. Press
2. When the patient is placed on the scale, the display shows the weight of the patient. The LOCK annunciator is on in
the upper display and beeps to indicate the end of the weighing process.
3. Press to change the display from lb to kg and vice-versa.
4. Press and hold
3.3

Hold/Release Function

Use the following steps to use the Hold/Release function.
1. Press to turn on the scale. 0.0 prompts along with ZERO on the display.
once the patient's weight stabilizes. The patient's weight and the HOLD and LOCK annunciators remain
2. Press
on the display when the patient is off the scale.
3. Press again to return the scale to zero.
Pressing
Note
Pressing
3.4

Using the Body Mass Index (BMI) Function

Use the following steps in determining the BMI.
3.4.1

LB Mode

1. Ensure that the scale is at zero.
2. The patient must be on the scale to obtain a weight. The LOCK annunciator appears on the display.
3. Press . The BMI and FT/IN annunciators are lit on the display and a default height value of 5 ft - 7.5 in is flashing.
BMI
4. Use and
5. Press .
ENTER
6. The BMI value and BMI annunciator are shown on the display. Press
BMI function will be turned off.
www.RiceLake.com
6 Visit our website
until OFF displays to turn off the scale.
will not work while using Hold/Release function.
prior to the patient getting on the scale will also hold the weight display.
to adjust the height value.
to return to the Weighing mode and the
CLEAR