Installation In To A Combustible Opening - Rinnai INBUILT ROYALE - ETR Customer Operation & Installation Manual

INSTALLATION IN TO A COMBUSTIBLE OPENING

Rinnai understands that not all households have an existing masonry fireplace. Rinnai offers the option of
installing the Flame Fire Royale into a decorative fireplace for either a single storey or two storey home. All
you need is a flat wall which can be either external or internal and a zero clearance box. A Rinnai Rigid flue
MUST also be installed (Part No. FLFKIT05 / FLFTWKIT). Flexible flue kits are not suitable.
The Zero clearance box can be installed hard against the combustible timber framework of the mock
fireplace due to the air gap created beneath the appliance with the use of the plinth panel, and the air gap
between the outer panel of the Flame fire and the Rinnai Zero clearance box. (Part No. ZEROR). Only this
Zero Clearance Box must be used for these installations.
Rinnai Flame Fire Rigid Flueing allows the air to be drawn in through the louvres in the plinth panel, pass
around the sides and back of the Flame fire heater and be drawn away through the outer skin of the flue.
The resulting air flow will keep the Zero clearance box panels at a safe operating temperature.
Refer to Rinnai Flueing Installation Manual for Rinnai Flame Fire Heaters.
Available flueing options as follows:
OBSTRUCTION
A B
C
ZERO ZERO
ZERO
CLEARANCE CLEARANCE
CLEARANCE
BOX BOX
BOX
HEATER HEATER
HEATER
Royale - Inbuilt ETR - 20 - Issue 4 ©Rinnai