Remote User Access - peplink ONE One User Manual

be rejected.
R eject : Routes in "Restricted Networks" will be rejected, routes not in the list will
be accepted.
This specifies the network in the "route import" entry
Restricted
Exact Match: When this box is checked, only routes with the same Networks and
Networks
Subnet Mask will be filtered.
Otherwise, routes within the Networks and Subnet will be filtered.
Export to other When this box is checked, routes learnt from this BGP profile will export to other
BGP Profile BGP profiles.
When this box is checked, routes learnt from this BGP profile will export to the
Export to OSPF
OSPF routing protocol.
12.14 Remote User Access
A remote­access VPN connection allows an individual user to connect to a private business network from
a remote location using a laptop or desktop computer connected to the Internet. Networks routed by a
Peplink router can be remotely accessed via OpenVPN, L2TP with IPsec or PPTP. To configure this
feature, navigate to N etwork > Remote User Access a nd c hoose the required VPN type.
12.14.1 L2TP with IPsec
Enter your pre shared key in the text field. Please note that remote devices will
Pre­shared Key
need this preshared key to access the Balance.
Listen On This setting is for specifying the WAN IP addresses that allow remote user access.
https://www.peplink.com
L2TP with IPsec Remote User Access Settings
157 Copyright @ 2019 Peplink