Peplink also published a whitepaper about Speedfusion which can be downloaded from the following url:
http://download.peplink.com/resources/whitepaperspeedfusionandbestpractices2019.pdf
12.3.2 IPsec VPN
All Peplink products can make multiple IPsec VPN connections with Peplink routers, as well as Cisco and
Juniper routers.
Note that all LAN subnets and the subnets behind them must be unique. Otherwise, VPN members will
not be able to access each other.
All data can be routed over the VPN with a selection of encryption standards, such as 3DES, AES128,
and AES256.
To configure, navigate to N etwork>Interfaces>IPsec VPN .
A N ATTraversal o ption and list of defined I Psec VPN p rofiles will be shown.
NATTraversal s hould be enabled if your system is behind a NAT router.
Click the N ew Profile button to create new IPsec VPN profiles that make VPN connections to remote
Peplink Balance, Cisco, or Juniper Routers via available WAN connections. To edit any of the profiles,
click on its associated connection name in the leftmost column.
https://www.peplink.com
88
Copyright @ 2019 Peplink