Ap > Profiles - peplink ONE One User Manual

Enter the IP address of the primary RADIUS server and, if applicable, the
Host
secondary RADIUS server.
Enter the RADIUS shared secret for the primary server and, if applicable, the
Secret
secondary RADIUS server.
Authentication In field, enter the UDP authentication port(s) used by your RADIUS server(s) or click
Port the D efault button to enter 1 812 .
In field, enter the UDP accounting port(s) used by your RADIUS server(s) or click
Accounting Port
the D efault button to enter 1 813 .
Choose between Device Name , L AN MAC address , D evice Serial Number and
NAS­Identifier
Custom Value
15.1.3 AP > Profiles
AP Profile Name
Ap Profile name
SSID
You can select the wireless networks for 2.4 GHz or 5 GHz separately for each SSID.
This drop­down menu specifies the national/regional regulations which the Wi­Fi radio
should follow.
Operating
Country
NOTE: Users are required to choose an option suitable to local laws and regulations.
Preferred
Indicate the preferred frequency to use for clients to connect.
Frequency
https://www.peplink.com
RADIUS Server Settings
AP Settings
● If a North American region is selected, RF channels 1 to 11 will be available
and the maximum transmission power will be 26 dBm (400 mW).
● If European region is selected, RF channels 1 to 13 will be available. The
maximum transmission power will be 20 dBm (100 mW).
176 Copyright @ 2019 Peplink