L2Tp With Ipsec 1 - peplink ONE One User Manual

WAN
Connection
Enter a name to represent this WAN connection.
Name
This setting enables the WAN connection. If schedules have been defined, you will be able
Enable
to select a schedule to apply to the connection.
There are five possible connection methods for Ethernet WAN:
Connection
Method
The connection method and details are determined by, and can be obtained from the ISP.
See the following sections for details on each connection method. DNS server settings can
be configured in the corresponding menu for each connection method.
This field shows that N AT ( network address translation) will be applied to the traffic routed
Routing Mode
over this WAN connection. I P Forwarding is available when you click the link in the help
text.
This option allows you to configure the WAN connection whether for normal daily usage or
as a backup connection only.
Connection
If A lways­on is chosen, the WAN connection will be kept on continuously, regardless of the
priority of other WAN connections.
Priority
If B ackup is chosen, the WAN connection will depend on other WAN connections. It will not
be used when one or more higher priority dependent WAN connections are connected.
Independent
If this is checked, the connection will be working independent from other Backup WAN
from Backup connections. Those in Backup Priority will ignore the status of this WAN connection, and
will be used when none of the other higher priority connections are available.
WANs
If the checkbox is u nticked , this option is disabled and the system will not reply to any
Reply to ICMP
ICMP ping echo requests to the WAN IP addresses of this WAN connection.
PING
Default: ticked (enabled)
This field refers to the maximum upload speed.
Upload
This value is referenced when default weight is chosen for outbound traffic and traffic
Bandwidth
prioritization. A correct value can result in effective traffic prioritization and efficient use of
upstream bandwidth.
This field refers to the maximum download speed.
Download
Bandwidth
Default weight control for outbound traffic will be adjusted according to this value.
https://www.peplink.com
WAN Connection Settings
● DHCP
● Static IP
● PPPoE
● L2TP
● GRE
57 Copyright @ 2019 Peplink