Active Directory:
Enter the matching Active Directory details to allow for Active Directory server authentication.
14.2 Misc. Settings
14.2.1 High Availability
The Peplink Balance supports high availability (HA) configurations via an open standard virtual router
redundancy protocol (VRRP, RFC 3768).
In an HA configuration, two samemodel Peplink Balance units provide redundancy and failover in a
masterslave arrangement. In the event that the master unit is down, the slave unit becomes active.
High availability will be disabled automatically where there is a dropin connection configured on a LAN
bypass port.
The following diagram illustrates an HA configuration with two Peplink Balance units and two Internet
connections:
In the diagram, the WAN ports of each Peplink Balance unit connect to the router and to the modem. Both
Peplink Balance units connect to the same LAN switch via a LAN port.
https://www.peplink.com
160
Copyright @ 2019 Peplink