Cli (Command Line) Support 2 - peplink ONE One User Manual

The test can be run again once it's complete by clicking the S tart button or you can click
Close and change the parameters for the test.
16.7 CLI (Command Line) Support
The serial console connector on some Peplink Balance units is RJ­45. To access the
serial console port, prepare a RJ­45 to DB­9 console cable. Connect the RJ­45 end to
the unit's console port and the DB­9 end to a terminal's serial port. The port setting will
be 1 15200,8N1 .
https://www.peplink.com 209 Copyright @ 2019 Peplink