Configurations
the LAN IP address of the Peplink Balance unit so that it is different from the HA
counterpart.
from High
Availability Pair
16.1.10
Feature Addons
Some balance models have features that can be activated upon purchase. Once the purchase is
complete, you will receive an activation key. Enter the key in the A ctivation Key field, click A ctivate , and
then click A pply Changes .
16.1.11
Reboot
This page provides a reboot button for restarting the system. For maximum reliability, the Peplink Balance
Series can equip with two copies of firmware, and each copy can be a different version. You can select
the firmware version you would like to reboot the device with. The firmware marked with ( Running) is the
current system boot up firmware.
Please note that a firmware upgrade will always replace the inactive firmware partition.
https://www.peplink.com
203
Copyright @ 2019 Peplink