Dns Forwarding; Custom Service Forwarding; Service Passthrough - peplink ONE One User Manual

DNS Forwarding
When DNS forwarding is enabled, all clients' outgoing DNS requests will also be intercepted and
forwarded to the built­in DNS proxy server.
Custom Service Forwarding
After clicking the e nable checkbox, enter your TCP port for traffic heading to the router, and then specify
the IP Address and Port of the server you wish to forward to the service to.
14.2.4 Service Passthrough
Service passthrough settings can be found at N etwork>Misc. Settings>Service Passthrough .
Some Internet services need to be specially handled in a multi­WAN environment. The Peplink Balance
can handle these services such that Internet applications do not notice it is behind a multi­WAN router.
Settings for service passthrough support are available here.
Session initiation protocol, aka SIP, is a voice­over­IP protocol. The Peplink Balance can
SIP
act as a SIP application layer gateway (ALG) which binds connections for the same SIP
https://www.peplink.com
Service Passthrough Support
166 Copyright @ 2019 Peplink