Firmware - peplink ONE One User Manual

Address(es)
16.1.2 Firmware
Upgrading firmware can be done in one of three ways.
Using the router's interface to automatically check for an update, using the router's interface
to manually upgrade the firmware, or using InControl2 to push an upgrade to a router.
The automatic upgrade can be done from S ystem > F irmware .
If an update is found the buttons will change to allow you to D ownload and Update the
firmware.
Click on the D ownload and Upgrade button. A prompt will be displayed advising to
download the Current Active Configuration. Please click on the underlined download text.
After downloading the current config click the O k button to start the upgrade process.
The router will download and then apply the firmware. The time that this process takes will
depend on your internet connection's speed.
The firmware will now be applied to the router*. The amount of time it takes for the firmware
to upgrade will also depend on the router that's being upgraded.
https://www.peplink.com 192 Copyright @ 2019 Peplink