URL Logging
Click e nable , and the enter the ip address and port (if applicable) where your remote syslog server is
located.
12.12 OSPF & RIPv2
The Peplink Balance supports OSPF and RIPv2 dynamic routing protocols. Click the N etwork tab from
the top bar, and then click the R outing Protocols > O SPF & RIPv2 item on the sidebar to reach the
following menu:
This field determines the ID of the router. By default, this is specified as the LAN IP
Router ID
address. If you want to specify your own ID, enter it in the C ustom field.
This is an overview of the OSPFv2 areas you have defined. Click on the area name to
Area
configure it. To set a new area, click A dd . To delete an existing area, click
https://www.peplink.com
OSPF
152
.
Copyright @ 2019 Peplink