Click "Save & Apply Now" to activate the changes. Below is a screenshot after configuration:
The content will be sync based on the P eriod t hat is configured before.
If you want to trigger the sync manually, you can click "
The "Status" column shows the sync progress.
When the sync complete, there is a summary as shown in the screenshot below:
To access the content, open a browser in MFA's client and enter the domain configured before (such as
http://mytest.com
) .
Configure an application to be published from the contenthub
Mediafast Routers allow you to configure and publish ant application from the router itself by using the
supported framework
●
Python (version 2.7.12)
●
Ruby (version 2.3.3)
●
Node.js (version 6.9.2)
First install the desired framework in "Package Manager" as below:
https://www.peplink.com
".
134
Copyright @ 2019 Peplink