Table of Contents
Advertisement
…
Create a new GC project and configure the IPCP 505. See the Global Configurator Help
File.
…
Set the IP address and subnet mask for the IPCP, and other IP settings.
…
Define the GlobalViewer Tree location of the unit.
…
Add the IPCP to the project.
…
Define e-mail settings and contacts.
…
Add serial, IR, and Ethernet device drivers.
…
Configure the ports on the IPCP and assign device drivers as needed.
…
Configure touchpanel buttons, if applicable, in Global Configurator.
…
Create a display shutdown schedule.
…
If a projector is part of the system and if desired, create a display lamp hours notifi-
cation e-mail.
…
Create a display disconnection notification e-mail.
…
Perform configurations for special applications, if needed.
…
Save the Global Configurator project/configuration.
…
Build and upload the configuration.
…
Test the system.
IPCP 505 • Hardware Features and Installation
9
Advertisement
Table of Contents
Need help?
Do you have a question about the IPCP 505 and is the answer not in the manual?