Electrical - Nikon ECLIPSE Ei Instructions Manual

5.3

Electrical

Illumination does not turn on when the light ON/OFF switch is turned on.
Problems
The AC adapter is not connected to the
microscope main body.
No electrical power.
Flickering or unstable lamp brightness
Problems
The AC adapter or power cord is not correctly
connected.
Chapter 5 Troubleshooting
Insert the DC cord of the AC adapter into the DC input

connector. (→ Section 2.2)
Insert the power cord connected with the AC adapter

into an electrical outlet. (→ Section 2.2)
 Connect correctly. (→ Sections 2.2, 4.6)
67
Check Items
Check Items