Table of Contents
Advertisement
CAUTION
1.
Assembly of the microscope
• Assemble the microscope while the AC adapter is not connected to it.
• Take care to avoid pinching your fingers and hands.
2.
Do not wet the product or allow ingress of foreign matter.
Do not allow the product to become wet, as doing so may result in malfunction, overheating, or
electric shock. If water or other liquids are accidentally spilled onto the product, immediately unplug
the power cord from the AC adapter. Then, wipe off the liquid with a dry cloth. Ingress of foreign
matter may also result in malfunction. If liquids or foreign matter gets in the product, cease use of
the product, and contact your nearest Nikon representative.
3.
Moving the product
• The microscope has carrying handholds and
handles.
There are three handholds on the base and two
handles on the arm of the microscope.
When carrying the microscope, hold the
microscope firmly by these handholds and
handles.
The storage part on the rear of the microscope is
not a handle. Do not hold this part as it stores the
AC adapter and power cord.
• When moving the product, do not hold by the
focus knobs, eyepiece tube, and stage, etc. The
parts may become detached and also result in
malfunctions.
4.
Do not inadvertently push the microscope on the table.
If you push this product inadvertently, it might move on the installation surface. We recommend that
you attach a wire to the security slot on the back of this product to fix it.
5.
Disposal of the microscope
To avoid biohazard risks, dispose of the microscope as contaminated equipment, according to the
standard procedures for your facility.
Safety Precautions
Where you can hold:
Where you must not hold:
Proper way to hold
6
Storage
part
Hide quick links:
Advertisement
Table of Contents
