Configuring Snmp V3 - Dahua PFS4307-4ET-96 Web Operation Manual

4.6.2 Configuring SNMP V3

Select Network Settings > SNMP.
Step 1
Select V3.
Step 2
Step 3 Configure parameters.
Step 4 Click OK.
Parameter
Read community
Write community
Trap address
Trap port
Send keep-alive packet
Read-only username
Figure 4-8 SNMP V3
Table 4-5 Description of SNMP parameters
Description
For description of these parameters, see Table 4-4.
Set the read-only username. It is for V3 only.
18